The Monster Makers' Ed H2.0 premium Full Armature is a water fillable half head sculpting form. It’s really light weight and composed of a high density plastic that makes it reusable for many years. RAD (Radiant Assisted Demold) Technology™ helps the demolding process for artists using wax based clay mediums by becoming a hot water vessel, causing a softening effect within the mold by transferring radiant heat from inside the form to the surrounding clay. Your molds can be easily demolded. The Ed Head measures 18" H x 13" W x 11" D with a circumference at the brow of 23" approximately. The Alanna Head measures 17" H x 12" W x 9.5" D with a circumference at the brow of 22" approximately. Each bust/ headform is supplied with a black plastic cap to seal the bottom spout.
Choose either: Ed H2.0 premium Full Armature or Alanna H2.0 premium Full Armature.
NB: Oversized item. Extra shipping charges may apply.
Approximate Additional Measurements
Width of face |
5 ½” |
Outer corner of eye to Outer corner of eye |
4 ½” |
Outer corner of eye to Outer edge of ear |
4 ½” |
Bridge of nose to Tip of nose |
2” |
Edge of nostril to Tip of nose |
1 ⅖” |
Philtrum (Bottom of nose to Top of upper lip) |
⅗” |
Jaw profile (Tip of chin to neck) |
3” |
Bottom of earlobe to Tip of chin |
5 ½” |
Length of face (Top of head to bottom of chin) |
9” |
Top of browbone to Bottom of eye socket |
2” |
Bottom of eye socket to Bottom tip of chin |
3 ¾” |
Outer edge of nostril to Outer edge of nostril |
1 ¾” |
Width of mouth |
3” |
Bottom of lower lip to Bottom tip of chin |
1” |
Width of chin |
2” |
Made from Polyethylene plastic (BPA-free)
Melting Point: 230° F (110° C)